PF1320 impact crusher delivery review
On May 9, 2019, Shanghai Hengyuan Group shipped a PF1320
impact crusher to a mine in Jiangsu. After several hours, it will be transported to the sandstone production line for on-site production.
PF1320 counterattacks the delivery of the live photo:
Impact crusher introduction:
Counter-type crusher, also known as counter-breaking, is mainly used for metallurgical, chemical, building materials, hydropower and other materials that often need to be relocated, especially for the operation of mobile materials such as highways, railways, hydropower projects, etc. The types, sizes and finished material requirements vary in a variety of configurations.
Counterattack the model and parameters:
|
Model
|
Rotor diameter
(mm)
|
Dimension of
inlet and
outlet
(mm*mm)
|
Maximum
feed size
(mm)
|
Processing
capacity
(t/h)
|
Motor power
(kw)
|
Weight
(t)
|
Outline size
(mm)
|
|
PF-1007
|
1000×700
|
400×730
|
300
|
25-45
|
30--55
|
9.5
|
2400×1558×2660
|
|
PF-1010
|
1000×1050
|
400×1080
|
350
|
50-80
|
55-75
|
12.2
|
2400×2250×2620
|
|
PF-1210
|
1250×1050
|
400×1280
|
350
|
80-120
|
110-132
|
14.2
|
2690×2338×2890
|
|
PF-1214
|
1250×1400
|
400×1430
|
350
|
100-160
|
132-160
|
18.5
|
2690×2688×2890
|
|
PF-1310
|
1300×1050
|
490×1170
|
400
|
80-140
|
110-160
|
13.5
|
2780×2478×2855
|
|
PF-1315
|
1320×1500
|
860×1520
|
500
|
150-220
|
220
|
20.9
|
3350×2710×2670
|
|
PF-1316
|
1300×1600
|
858×1650
|
460
|
150-200
|
200
|
20.5
|
3096×3273×2667
|
|
PF-1415
|
1450×1500
|
900×1650
|
500
|
200-260
|
260-280
|
27.1
|
3400×3500×3280
|
|
PF-1515
|
1500×1500
|
980×1610
|
500
|
220-280
|
315
|
30.5
|
3950×3350×3055
|
|
PF-1500
|
1530×1500
|
1530×500
|
300
|
230-320
|
220-315
|
28
|
3300×3100×3060
|
Note: Parameters are subject to change without prior notice, please contact us.
Shanghai Hengyuan counterattacks the advantages of the advantage:
1. It is more effective to process materials with large moisture content and effectively prevent material blockage.
When the moisture content of the treated material is too large, the feed chute and the counterplate of the impact crusher may be equipped with a heating device to prevent the material from sticking. The impact crusher does not need to be equipped with a bottom sieve plate to prevent clogging.
Second, the applicable material hardness is more extensive
2.The hammer is firmly fixed to the rotor by a mechanical clamping structure and has a large moment of inertia when rotated with the rotor. Compared with the hammer crusher (the hammer is in a suspended state), the rotor of the impact crusher has greater momentum, adapts to crushing harder materials, and consumes less energy.
Third, it can be convenient and flexible to adjust the granularity of discharge, and the adjustment range is wide.
3.The company's counter-breaking can be adjusted in a variety of ways, such as adjusting the rotor speed, adjusting the counter-attack and the clearance of the grinding chamber. The gap adjustment can be adjusted mechanically or hydraulically, and the hydraulic adjustment system can be used to easily adjust the gap through the local operation button or the travel control system.
Fourth, the wearing parts of the wearing parts are small, and the metal utilization rate is high.
4.The wear of the hammer is only present on the side facing the material. When the rotor speed is normal, the feed will fall to the surface of the hammer (the striking surface), and the back and sides of the hammer will not be worn. Even the wear on the side of the material is scarce. And the bottom grinding rod is also easy to replace. The metal utilization rate of the impact crusher plate hammer can be as high as 45% - 48%.
5. The replacement of spare parts is simple and the maintenance cost is reduced accordingly.
It is convenient to replace the hammer with a special tool designed, and it takes only one shift to replace a set of hammers.
about us:
Shanghai Hengyuan Group has advanced quality inspection instruments, and more than 80% of processing equipment is imported equipment with high precision and fast speed. Other major equipments include vertical integrated machining centers, CNC milling machines, CNC gantry grinders, boring machines, drilling machines, planers, coordinate measuring machines, CNC cutting machines, etc., with strong production capacity. The management modes adopted by the factory are: Enterprise Resource Planning (ERP), Manufacturing Resource Planning (MRPII), Just-In-Time Production (JIT), Shipment Quality Inspection (OQC), and Supply Chain Management (SCM). Strict quality control, complete CE and "ISO9001-2015" quality management certification system.
The company welcomes new and old customers to call, make an appointment to visit, we will provide you with complete sets of gravel equipment, sandstone production line solutions!
For more product information, please visit our website: http://m.sfsjzp.com/en or follow the company WeChat public number: shhyyj8808